Icom IC E90
Baofeng UV-3R
Kenwood TS-770E
Kenwood TS-830S
Kenwood TS-700S
YAESU FT897D
YAESU FTM10-E
YAESU FT817ND
Technology museum Berlin
Museum for communication
Broadcast museum Fürth
Ausrüstung

At present, I am using the following equipment in the amateur radio communication:



Icom IC-E90

The IC E90 is a small, compact walkie-talkie for outdoor use.

The powerful Tri-Band-Transceiver has an output of 0,5 W (low power) and 5 W (at normal power).

Transmitting is possible at

2 m (144-146 MHz)
70 cm (430-440 MHz)
6 m (50-52 MHz, transmit mode F3E on 6m is permitted here in Germany at present).

Receive mode is possible from 495 kHz to 999.990 MHz.




 

IC-E90

Baofeng UV-3R

The Baofeng UV-3R transceiver is an extremely small walkie-talkie.

Transmit power is about 2 W.

The frequency range covers the 2 m- and 70 cm band.

The transmit power can be reduced a little.




 

UV-3R

Kenwood TS-770E

I use a Kennwood TS-770E transceiver at home in the 2 m and 70 cm band.

The output of the TS-770E is about 1 W (low power) and 10 W (at normal power) in SSB, CW and FM.

I have attached the optionally available external loudspeaker SP 70.
This speaker improves the quality in the receive mode.




 

SP-70

Kenwood TS-770E 



Kenwood TS-830S

On short wave I use a Kennwood TS 830-S.
At the moment I operate the transceiver mostly on the 20m-band.

The transceiver is built up in hybrid technology:
The Receiver uses semiconductor technique.
In the sending part are transmitting tubes.




 

SP-30

Kenwood TS-830S 



The TS 830-S operates on the following bands:



160 m - Band
80 m - Band
40 m - Band
30 m - Band
20 m - Band
17 m - Band
12 m - Band
10 m - Band



 

Yaesu MD-200 A8X

As modes are possible SSB and CW.

I use a Yaesu MD 200 A8X microphone besides the original hand microphone.




 

AT-230

Short wave antenna

My HF-antenna is a modified vertical antenna / modified CB-antenna.





YAESU FT897D

My (modern) all band and all mode transceiver is a YAESU FT897D.



FT-897D 



The following modifications are made:



Installation of a FP-30 External AC Power Supply
Installation of a YF-122S Collins SSB Filter (2.3 kHz/4.7 kHz: -6 dB/-66 dB)
Installation of a FC-30 External Automatic Antenna Tuner
Use of an ATAS-120A Active-Tuning Antenna System
Use of a MD-200A8X Desktop Microphone
Installation of an external analogous LDG S-Meter


The FT 897D works in SSB-, CW-, AM-, FM-, and Digital modes in the bands:



160 m - Band
80 m - Band
40 m - Band
30 m - Band
20 m - Band
17 m - Band
12 m - Band
10 m - Band
6 m - Band
2 m - Band
70 cm - Band


YAESU FT-M 10E

I use a Yaesu FT M 10 E as a mobile equipment.

The FT M 10 E is a VHF/UHF mobile transceiver the frequency areas:
TX: 144 MHz 146 and 430-440 MHz (expandable )
RX: 0,5/1,8 (at which) 76-108 MHz/108-222 MHZ/300-999 MHz

The transmit power can be adjusted respectively in three steps and are
50/20/5 W (VHF )
40/20/5 W UHF



FTM10E 



The following modifications are made:



Installation MEK M 10 Yaesu microphone socket
Installation of a MH 59 A8J Yaesu DTMF/remote control microphone
Connection possibility to the board HIFI system of the car.


YAESU FT-817ND

My all band and all mode QRP-transceiver is a Yaesu FT-817ND.

The output power is between 0,5 W and 5 W.



FT817ND with LDG-tuner 



Kenwood TS-700S

The Kenwood TS-700S multimode transceiver provides 2 meter operation in FM, LSB, USB, AM and CW modes.

Power output may be selected at 1 watts (FM) or 10 watts (FM/SSB/CW) 3 watts AM.




 

SP-70

TS-700S